Basement Waterproofing

Interior Drain Repair

When an interior drainage system installation begins, the perimeter of the floor is removed.  This process is used on the floor only- the footing and foundation are not damaged by this process. If you have block foundation walls, weep holes are drilled into each core of each block so that the water contained within the hollow cores of the wall is continually drained away.

Clean gravel is laid down on the bottom of the trench that has been removed around the perimeter.  The system is laid on top, and then gravel is laid on top.  Once this is completed, concrete is laid back down on top of the system, it’s smoothed over and the area is cleaned.

Water from the block, floor/wall joint, and from under the floor is all drained away through the system.  If you have floor cracks, lateral drainage piping is laid under the floor and connected to the drainage system. The wall drain is a molding with spacers that create a neat-looking drain against the wall.  Because it sticks up above the floor about an inch, dirt and small objects from the floor can't get in and clog it.

Block Wall Repair

Bowing of basement walls is a serious problem and must be addressed before the problem becomes irreparable. Although it is sometimes difficult to see bowing walls or sinking foundations when they begin, there are other signs that help you catch problems before they arise.

Look for these signs:

• Cracks in the walls that are wider at the top than at the bottom
• Floors that are not level
• Doors, cabinets and windows that do not shut properly
• Cracking in the upstairs plaster and/or drywall
• Cracking in exterior brickwork and/or caulking
• Leaning of outside chimneys and/or porches

Home and Foundation Waterproofing

Foundation Repair

At Midwest Waterproofing, we are experts in waterproofing basements. We use the most durable and thermally-efficient products available today to seal your foundation and permanently eliminate water penetration. 

Some companies may claim to waterproof but may actually only be damp-proofing your foundation.  And there is a difference between damp-proofing and waterproofing!

Damp-proofing is done by sealing a wall on the inside.  When your home is damp-proofed, the sealant actually traps water within the wall and speeds up the deterioration of the wall, which often leads to foundation walls bowing and serious structural damage. Water concealed below grade can get under the footings of a foundation and destabilize the structural integrity of your home or business. This can lead to cracked foundation walls and footings, and very costly repairs.

Waterproofing the exterior of a foundation completely eliminates water and moisture penetration through the walls into a basement and permanently fixes the problem!

For a basement to be absolutely waterproof, it needs to have protection from sub-surface water on all below-grade walls. This protection must span from grade-level down to the foundation footing or to a depth deeper than the basement floor.  We use the most advanced and resilient products available to permanently seal out water from damaging your basement and foundation.  And all of our work is backed by an unconditional lifetime guarantee, so you never have to worry about water in your foundation or basement again!  And a dry basement is a happy basement!

Mold Retardent

Standing water and heavy moisture can lead to an infestation of mold, mildew and fungus on the joists, studs and sheet-rock in the basement.  Not only can mold cause wood-rot and lead to costly repairs, it can also be damaging to your health. Tim Lustig who, along with his team, is committed to protecting children and families from the hazards of poor indoor air quality resulting from a wet basement, allergenic mold, toxic mold, and much more.

Midwest Waterproofing will remove mold spores, mildew, fungus, toxins and dead organic material from all surfaces and apply a mold-resistant coating to prevent any recurrent mold growth in the future.

Indoor Air Quality Purification

Research has shown that indoor air quality can be worse than that of outdoor air. Problems can arise from any number of factors that including moisture, insects, pets, appliances, radon, materials used in household products and furnishings, smoke, and other sources. The effects of poor indoor air quality can range from minor annoyances to major health risks.

One of the major factors that affects the quality of your indoor air is moisture. Moisture encourages biological pollutants, including allergens such as mold, mildew, dust mites and cockroaches.

The specialists at Midwest Waterproofing will test the quality of your indoor air and offer the best possible solutions to eliminate moisture sources, therfore helping to eliminate moisture and maintain good fresh air to keep your family safe and healthy.